Post up your winter MODS!
Bruce will probably need 4 posts to accurately list them all..... And that's a lite year for him. Haha
I'm adding a Baer Big Brake kit to the car this year and a couple of other small goodies.
Post up your winter MODS!
Bruce will probably need 4 posts to accurately list them all..... And that's a lite year for him. Haha
I'm adding a Baer Big Brake kit to the car this year and a couple of other small goodies.
SVT COBRA
Sorry, Jibber! My car is pretty much done. Mostly working on other people's cars now. All I did this winter was put the car cover on the old Stealth Fighter. I do have a couple of very minor, non-essential electrical repairs to do when it's a bit warmer in the garage. Oh, yeah. Gotta put some air in one of the tires on my winter wheels, too.
Bruce
TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...
My Shelby got a new Metco Auxiliary Idler Pulley, ported and polished the blower and finished porting and polishing even more of the blower elbow, NGK plugs, Metco upper control arm, Shelby rear strut tower brace, rear seat delete, ready to go !! Should put me around 860 hp
About 2500 miles, less than 600 on my 07
Some pics for ya
IMG_5105.JPGIMG_5113.jpgIMG_4918.jpgIMG_4965.JPG
Yeah, Metco stuff is really nice. I got a few things from them but they don't have a lot for a 94.
Bruce
TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...
Still waiting to do the major thing needed to be done on the wife's Shelby, a new clutch.
McLeod RXT waiting to be installed, can't wait to get it done.
On my car, I was just about to start my painted-caliper project and noticed that my front brake pads are down to 1mm, so that project got put on hold and had to order new front brake pads and rotors.
Mine: '13 Mustang GT Track Pk. 2.3L Whipple, 608 RWHP, 517 RWTQ.
Hers: '08 GT500 '13-'14 2.3L TVS & injectors, 656 RWHP, 661 RWTQ.