+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Mustangs unlimited this sunday

  1. #1
    Senior Member TorchredSVT's Avatar
    Join Date
    Apr 2012
    Location
    Chelmsford, MA
    Posts
    1,294

    Mustangs unlimited this sunday

    Thought I would post this up in case anyone felt like going. I think I am going to make the drive down pending the weather

    Foureyepride.com guys have created a cruise....the meet up locations are as follows:

    Itinerary For The Cruise:

    (from Northern NH)
    6:50am - 7:00 am departure - Rockingham park (Salem NH) FIRST MEET
    7:15 departure - Rest Area on 495 after Lowell connector/Route 3
    7:45 am departure - Westboro Rest Area on the Mass Pike between Exits 11A and 11
    8:30 am - Sturbridge Rest Area - FIRST Rest Area on Route 84 after merging onto Route 84 from the Mass Pike After Exit 2 and before 1
    9:00 am - Arrive at Mustangs Unlimited
    -- Ian --
    2003 10th Aniv. Cobra Convertible Torch Red
    Born on 6/18/2003 / Build # 4357 / # 489 0f 10th Aniv
    1 of 369 Torch Red 10th Aniversary cars Built

  2. #2
    Senior Member chachee52's Avatar
    Join Date
    Apr 2012
    Location
    Tyngsboro/Gilford
    Posts
    1,506
    I'd like to, but I'm hoping to get all my yard stuff done this weekend. Plus I think that it's too far for me (haven't changed the oil in anticipation of taking the engine out to rebuild).
    But I do want to hit one of these at some point.
    Growing older but not UP

    My car now has a heater, and now has HEAT!!

  3. #3
    Moderator ToplessPony94's Avatar
    Join Date
    Apr 2012
    Location
    Hudson, NH
    Posts
    1,881
    Not sure yet, but I may be able to make this. Probably won't be sure until the day before. If I do, I'll jump in at the 495 Chelmsford rest area.
    Bruce
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...

  4. #4
    Senior Member TorchredSVT's Avatar
    Join Date
    Apr 2012
    Location
    Chelmsford, MA
    Posts
    1,294
    weather is looking iffy right now.....but its only thursday, we'll see
    -- Ian --
    2003 10th Aniv. Cobra Convertible Torch Red
    Born on 6/18/2003 / Build # 4357 / # 489 0f 10th Aniv
    1 of 369 Torch Red 10th Aniversary cars Built

  5. #5
    Senior Member 390gtconv's Avatar
    Join Date
    Apr 2012
    Location
    Chester, NH
    Posts
    2,073
    Sunday, some clouds in am then clearing as day goes on.... So far Sunday looks OK.
    http://www.whdh.com/weather
    http://www.myfoxboston.com/weather
    or
    http://www.accuweather.com/en/us/pla...recast/2371_pc

  6. #6
    Senior Member TorchredSVT's Avatar
    Join Date
    Apr 2012
    Location
    Chelmsford, MA
    Posts
    1,294
    Was down in CT meeting a family for our foster pup and drove by the show.....didn't go down becuase of the weather. Boy am I glad I didn't......lets just say this place was less than desirable.
    Atleast I know now.....
    -- Ian --
    2003 10th Aniv. Cobra Convertible Torch Red
    Born on 6/18/2003 / Build # 4357 / # 489 0f 10th Aniv
    1 of 369 Torch Red 10th Aniversary cars Built

  7. #7
    Senior Member chachee52's Avatar
    Join Date
    Apr 2012
    Location
    Tyngsboro/Gilford
    Posts
    1,506
    The entire shop is less than desirable or just the show?
    Growing older but not UP

    My car now has a heater, and now has HEAT!!

  8. #8
    Senior Member 07 stang gt's Avatar
    Join Date
    Apr 2012
    Location
    southern nh
    Posts
    767
    Their shop is a big warehouse with only very long glass counters where catalogs are displayed with some parts in the glass displays and they have some cool Mustangs on display as well, other than that, pretty boring, but they have an unbelievable parts warehouse.

  9. #9
    Senior Member 390gtconv's Avatar
    Join Date
    Apr 2012
    Location
    Chester, NH
    Posts
    2,073
    I went to MU in Conn ~ 12 yrs ago (not my first time). That was when they had counter help that new older cars very well and were helpful as well as knowledgeable. Went a few yrs later for parts because my last couple orders were shipped incorrect. It was immediately obvious that old staff gone, newer staff & management just phone jockeys. So that point on if I need an expensive part, going in person to pickup and inspect.
    Last edited by 390gtconv; 04-29-2014 at 08:53 AM.

  10. #10
    Senior Member TorchredSVT's Avatar
    Join Date
    Apr 2012
    Location
    Chelmsford, MA
    Posts
    1,294
    the location it self just is not great. As mentioned, mustangs unlimited is a giant wearhouse, not really a big surprise as it is a mail order company. I can't speak to their business, never done anything with them.

    I am referring to the parking lot itself, its small, on the side of the hill and there is NO room for spectator parking. I can't see them getting more than 75 cars in their lot , and even that's pushing it. Just not a great location for a show in my opinion.
    -- Ian --
    2003 10th Aniv. Cobra Convertible Torch Red
    Born on 6/18/2003 / Build # 4357 / # 489 0f 10th Aniv
    1 of 369 Torch Red 10th Aniversary cars Built

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts