+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: Eastwood Fender Rolling tool

  1. #1
    Senior Member LILBLKSNAKE's Avatar
    Join Date
    Apr 2012
    Location
    Tewksbury, MA
    Posts
    853

    Eastwood Fender Rolling tool

    I just purchased this tool to roll the quarters on my GT because they were slicing the sidewalls during hard launches at the track.

    Those of you on SVT Performance may have seen the guy renting his out for 50.00 a day.
    I have the exact same tool, and will offer it to club members FREE, as long as you take your time and don't ruin it.

    If it's OK with Rick, I was thinking of having a get together one day so we can help each other get a few cars done.

    So far I know I have mine and Jibber's to do.

    1994 GT Convertible
    1997 COBRA **SOLD**
    2003 GT Convertible
    2013 Mustang GT 5.0 **SOLD**
    2019 F150 Lariat Luxury

  2. #2
    Senior Member whtmare's Avatar
    Join Date
    Sep 2012
    Posts
    744
    That Ed such a good guy!

    2008 mustang gt kenne bell blown 610 rwp 540rwt

  3. #3
    Senior Member 390gtconv's Avatar
    Join Date
    Apr 2012
    Location
    Chester, NH
    Posts
    2,073
    Quote Originally Posted by LILBLKSNAKE View Post
    I just purchased this tool to roll the quarters on my GT because they were slicing the sidewalls during hard launches at the track.

    Those of you on SVT Performance may have seen the guy renting his out for 50.00 a day.
    I have the exact same tool, and will offer it to club members FREE, as long as you take your time and don't ruin it.

    If it's OK with Rick, I was thinking of having a get together one day so we can help each other get a few cars done.

    So far I know I have mine and Jibber's to do.
    Looking to get the cars ready for the trip to 2014 Carlisle Ford Nationals?

  4. #4
    Senior Member TorchredSVT's Avatar
    Join Date
    Apr 2012
    Location
    Chelmsford, MA
    Posts
    1,294
    please, Ed will never go, I have given up asking him!
    -- Ian --
    2003 10th Aniv. Cobra Convertible Torch Red
    Born on 6/18/2003 / Build # 4357 / # 489 0f 10th Aniv
    1 of 369 Torch Red 10th Aniversary cars Built

  5. #5
    Moderator ToplessPony94's Avatar
    Join Date
    Apr 2012
    Location
    Hudson, NH
    Posts
    1,881
    What?!? I can't believe Jibber would allow this to happen to his car!
    Bruce
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...

  6. #6
    Senior Member LILBLKSNAKE's Avatar
    Join Date
    Apr 2012
    Location
    Tewksbury, MA
    Posts
    853
    Quote Originally Posted by TorchredSVT View Post
    please, Ed will never go, I have given up asking him!
    and you've been how many times?? ZERO

    1994 GT Convertible
    1997 COBRA **SOLD**
    2003 GT Convertible
    2013 Mustang GT 5.0 **SOLD**
    2019 F150 Lariat Luxury

  7. #7
    Senior Member TorchredSVT's Avatar
    Join Date
    Apr 2012
    Location
    Chelmsford, MA
    Posts
    1,294
    becuase I dont wanna drive by myself for 6 hours!! I am hoping I will be able to go with someone at some point
    -- Ian --
    2003 10th Aniv. Cobra Convertible Torch Red
    Born on 6/18/2003 / Build # 4357 / # 489 0f 10th Aniv
    1 of 369 Torch Red 10th Aniversary cars Built

  8. #8
    Senior Member Jibber's Avatar
    Join Date
    Apr 2012
    Location
    New Hampshire
    Posts
    1,320
    Quote Originally Posted by ToplessPony94 View Post
    What?!? I can't believe Jibber would allow this to happen to his car!
    Won't be for a few years if at all.
    Thinking about (in the future) getting 18" AFS reps along with potential 345 meats in the rear. Since I have upgraded with extended lugs in rear, with a larger spacer I could get those under there.
    Just in the thought phases now.

    I would definitely like to attend that fender rolling party if one takes place.
    SVT COBRA


  9. #9
    Senior Member 390gtconv's Avatar
    Join Date
    Apr 2012
    Location
    Chester, NH
    Posts
    2,073
    Quote Originally Posted by TorchredSVT View Post
    becuase I dont wanna drive by myself for 6 hours!! I am hoping I will be able to go with someone at some point
    Ride down WITH Ed. Kills two birds one stone. lol

  10. #10
    Senior Member TorchredSVT's Avatar
    Join Date
    Apr 2012
    Location
    Chelmsford, MA
    Posts
    1,294
    Quote Originally Posted by 390gtconv View Post
    Ride down WITH Ed. Kills two birds one stone. lol
    My point exactly George...I begged him for a month last year to go and he told me no every single time
    -- Ian --
    2003 10th Aniv. Cobra Convertible Torch Red
    Born on 6/18/2003 / Build # 4357 / # 489 0f 10th Aniv
    1 of 369 Torch Red 10th Aniversary cars Built

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts