+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Cruising downtoan manchester

  1. #1
    Senior Member rhoidahl's Avatar
    Join Date
    Apr 2012
    Location
    Derry, NH
    Posts
    741

    Cruising downtoan manchester

    img004.jpg

    CRUISING DOWNTOWN MANCHESTER brochure and registration form; more to follow on this event later...


    2003 Cobra "Terminator" Convertible
    Last Dyno Run = 496 rear wheel hp, 490 foot pound of torque

  2. #2
    Senior Member rhoidahl's Avatar
    Join Date
    Apr 2012
    Location
    Derry, NH
    Posts
    741
    As most of you know, we usually meet up together and drive into this event so we can park together as a group. If you want to participate, please print off the registration form and mail with your check for $20 payable to Manchester Rotary to me NO LATER THAN FRIDAY 8/23. Otherwise, you may not be able to park with the group. Mail your registration form and check to me at Randy Hoidahl, 6 Judith Lane, Derry, NH 03038.
    Information on the meet up place and time will be posted as we get closer to the show date...


    2003 Cobra "Terminator" Convertible
    Last Dyno Run = 496 rear wheel hp, 490 foot pound of torque

  3. #3
    Senior Member rhoidahl's Avatar
    Join Date
    Apr 2012
    Location
    Derry, NH
    Posts
    741
    Things are set for NH Mustang Club members (who want to) to help with parking and directing traffic at the Cruising Downtown Manchester show (usually those who help out get a free tee shirt). And we are all set to park as a group in our usual spot on South Elm Street. We have to be ready for when they begin letting cars in at 7:00. So we will meet at the Dunkin Donuts on South Elm Street, and leave there at 6:30 am to head to the show. That should give us adequate time to get parked and settled before starting to direct traffic and parking at 7:00. Get your registration forms to me by Friday 8/23. Let me know if there any questions...


    2003 Cobra "Terminator" Convertible
    Last Dyno Run = 496 rear wheel hp, 490 foot pound of torque

  4. #4
    Senior Member 390gtconv's Avatar
    Join Date
    Apr 2012
    Location
    Chester, NH
    Posts
    2,074
    Randy as in the past I'll help if I get my car back together by then. Let ya know.

  5. #5
    Senior Member rhoidahl's Avatar
    Join Date
    Apr 2012
    Location
    Derry, NH
    Posts
    741
    Thanks George; what about Chris??


    2003 Cobra "Terminator" Convertible
    Last Dyno Run = 496 rear wheel hp, 490 foot pound of torque

  6. #6
    Senior Member 390gtconv's Avatar
    Join Date
    Apr 2012
    Location
    Chester, NH
    Posts
    2,074
    Quote Originally Posted by rhoidahl View Post
    Thanks George; what about Chris??
    Not sure yet. He bought a house in CT, not sure if he'll be up here & when. I'll ask.

  7. #7
    Senior Member Jibber's Avatar
    Join Date
    Apr 2012
    Location
    New Hampshire
    Posts
    1,320
    This was a great show last year. Have fun this year.
    SVT COBRA


  8. #8
    Senior Member TorchredSVT's Avatar
    Join Date
    Apr 2012
    Location
    Chelmsford, MA
    Posts
    1,294
    MIGHT be able to make it this year!
    -- Ian --
    2003 10th Aniv. Cobra Convertible Torch Red
    Born on 6/18/2003 / Build # 4357 / # 489 0f 10th Aniv
    1 of 369 Torch Red 10th Aniversary cars Built

  9. #9
    Senior Member rhoidahl's Avatar
    Join Date
    Apr 2012
    Location
    Derry, NH
    Posts
    741
    REMINDER !!!! I have received only THREE registration forms so far. If you want to drive in and/or park with the group, make sure I get your registration form by FRIDAY...


    2003 Cobra "Terminator" Convertible
    Last Dyno Run = 496 rear wheel hp, 490 foot pound of torque

  10. #10
    Senior Member whtmare's Avatar
    Join Date
    Sep 2012
    Posts
    744
    Who is going so far?

    2008 mustang gt kenne bell blown 610 rwp 540rwt

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts