+ Reply to Thread
Results 1 to 7 of 7

Thread: Fordís new 7th Generation Mustang sticks with pure gasoline

  1. #1
    Moderator ToplessPony94's Avatar
    Join Date
    Apr 2012
    Location
    Hudson, NH
    Posts
    1,851
    Bruce
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...

  2. #2

  3. #3
    Senior Member 390gtconv's Avatar
    Join Date
    Apr 2012
    Location
    Chester, NH
    Posts
    2,034
    Last edited by 390gtconv; 09-16-2022 at 01:01 PM.

  4. #4
    Senior Member marinedad's Avatar
    Join Date
    Oct 2013
    Location
    Derry NH
    Posts
    283
    I see no bad for this car, only good. Of course that's only me

  5. #5
    Moderator ToplessPony94's Avatar
    Join Date
    Apr 2012
    Location
    Hudson, NH
    Posts
    1,851
    I mostly like it. I actually prefer the Ecoboost nose to the GT. The Dark Horse is what it is and judging that nose is not what that car is about, but it's an interesting concept. I would probably never get used to the huge digital dash - that just doesn't feel like a Mustang to me.

    I got a chuckle out of the full-res picture of the interior. When displayed at full magnification, the image below is at the right end of the digital dash. Probably not a message the marketeers intended to send. LOL!

    9-16-2022 5-23-59 PM.jpg
    Bruce
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...

  6. #6
    Senior Member 390gtconv's Avatar
    Join Date
    Apr 2012
    Location
    Chester, NH
    Posts
    2,034
    Bruce, this is what you're waiting for, saw this yesterday:
    https://www.msn.com/en-us/news/techn...3bcefac2c945e0

  7. #7
    Moderator ToplessPony94's Avatar
    Join Date
    Apr 2012
    Location
    Hudson, NH
    Posts
    1,851
    Thanks George! Good article. Yes, that's where I think things will eventually end up. I feel that hybrid and EV are just stepping stones on the way to fuel cell vehicles.
    Bruce
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts