+ Reply to Thread
Results 1 to 5 of 5

Thread: New Dyno Numbers

  1. #1
    Senior Member 07 stang gt's Avatar
    Join Date
    Apr 2012
    Location
    southern nh
    Posts
    767

    New Dyno Numbers

    Made a little trip up to see Pete yesterday and run my Shelby on the dyno after my winter mods. Ran some pretty good numbers. 717 hp to the rear wheels, 740 ft lbs torque, which should put me at 825hp or so at the motor. Now if it could just warm up so I can keep it on the ground. 80 feet of rubber in second gear can get pretty hairy!


    Dyno Numbers 4-16-2020 (2).jpg

  2. #2
    Moderator ToplessPony94's Avatar
    Join Date
    Apr 2012
    Location
    Hudson, NH
    Posts
    1,881
    Nice Jimmy!
    Bruce
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...

  3. #3
    Senior Member Jibber's Avatar
    Join Date
    Apr 2012
    Location
    New Hampshire
    Posts
    1,320
    Very Nice!!!
    SVT COBRA


  4. #4
    Senior Member 390gtconv's Avatar
    Join Date
    Apr 2012
    Location
    Chester, NH
    Posts
    2,071
    I spoke with Ryan last week at a store he was stocking up. He said he too is getting some major engine work done. Be nice to get cars out this year.
    Mine coming out of my trailer today.

  5. #5
    Senior Member marinedad's Avatar
    Join Date
    Oct 2013
    Location
    Derry NH
    Posts
    324
    Nice numbers, Jimmy

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts