+ Reply to Thread
Results 1 to 9 of 9

Thread: Chin Spoiler

  1. #1
    Senior Member marinedad's Avatar
    Join Date
    Oct 2013
    Location
    Derry NH
    Posts
    323

    Chin Spoiler

    Looking to put a chin splitter on my 2011 GT without changing the OE fascia. So far I looked at American Muscle, CJ Pony parts no luck. Any ideas?

  2. #2
    Moderator ToplessPony94's Avatar
    Join Date
    Apr 2012
    Location
    Hudson, NH
    Posts
    1,881
    Bruce
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...

  3. #3
    Senior Member Dennis O'Shea's Avatar
    Join Date
    Apr 2012
    Location
    Candia Newhampshire
    Posts
    1,307
    You can make one for less than hundred dollars out of a sheet of Abs Plastic I made my own for my 08 and had it Hydro dipped in carbon fiber 1/4 inch 4x8 sheet of black ABS is less than A hundred and you can get it in Londonderry NH

  4. #4
    Senior Member marinedad's Avatar
    Join Date
    Oct 2013
    Location
    Derry NH
    Posts
    323

    Chin spoiler

    Thanks for the information. I looked at the ones you showed me already, but, it requires front fascia modification. Was looking for one that just attaches to the bottom of the front. Making one is interesting, but, unfortunately I ain't that talented.
    Thanks

  5. #5
    Senior Member Dennis O'Shea's Avatar
    Join Date
    Apr 2012
    Location
    Candia Newhampshire
    Posts
    1,307
    Quote Originally Posted by marinedad View Post
    Thanks for the information. I looked at the ones you showed me already, but, it requires front fascia modification. Was looking for one that just attaches to the bottom of the front. Making one is interesting, but, unfortunately I ain't that talented.
    Thanks
    I can show you its really simple and would take less than an hour

  6. #6
    Senior Member marinedad's Avatar
    Join Date
    Oct 2013
    Location
    Derry NH
    Posts
    323

    chin spoiler

    Dennis,
    Thanks, I'll take you on that after the tax season is over. Right now I'm out 7 days a week.

    Bob

  7. #7
    Junior Member
    Join Date
    May 2012
    Posts
    2
    I have a CDC chin spoiler mentioned above. No modification needed. Used it one summer before going with the Boss 302 setup. I would let it go for $100. Pickup in Derry.

  8. #8
    Senior Member 07 stang gt's Avatar
    Join Date
    Apr 2012
    Location
    southern nh
    Posts
    767
    New member to the club? Welcome ! Tell us about yourself and your car.....

  9. #9
    Junior Member
    Join Date
    May 2012
    Posts
    2
    Not new..........been trolling around the group for years. Just not a big participant. I've gone to a few events in the past but it's probably been 4 or 5 years. I have a 2010 GT Convertible with a few mods including Roush Supercharger. Thanks, Jim

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts