+ Reply to Thread
Results 1 to 10 of 10

Thread: Canobe show info

  1. #1
    Senior Member whtmare's Avatar
    Join Date
    Sep 2012
    Posts
    737

    Canobe show info

    This is coming soon, sign up as soon as you can, room is limited,

    Remember cars must be in nice shape, no Dents, primer, or body filler, we have the right to turn cars away,

    No weapons or alcohol of any kind allowed, cars will be checked, and you will have to walk thru a metal detector, these are all the Parks rules

    Thanks
    Attached Images

    2008 mustang gt kenne bell blown 495 rwp 420rwtq.Dyno queen #s 509 rwp 432rwtq

  2. #2
    Moderator ToplessPony94's Avatar
    Join Date
    Apr 2012
    Location
    Hudson, NH
    Posts
    1,519
    Thanks Ryan! In the past NMHC members have been exempt from having to submit photos with their application. Is this still the case?

    OK, never mind. The image was too small to read well on my phone. I see that members need not submit photos.
    Last edited by ToplessPony94; 08-14-2017 at 08:10 PM. Reason: OOPS
    Bruce
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...

  3. #3
    Junior Member
    Join Date
    Oct 2013
    Location
    Derry NH
    Posts
    29

    Canobie Lake

    OK where do we sign up

  4. #4
    Junior Member
    Join Date
    Oct 2013
    Location
    Derry NH
    Posts
    29
    Usually get an email about signing up this year nothing

  5. #5
    Junior Member
    Join Date
    Oct 2013
    Location
    Derry NH
    Posts
    29

    Canobie Lake

    I printed the application but can't make out Randy's last name

  6. #6
    Moderator ToplessPony94's Avatar
    Join Date
    Apr 2012
    Location
    Hudson, NH
    Posts
    1,519
    Quote Originally Posted by marinedad View Post
    I printed the application but can't make out Randy's last name
    Hoidahl
    Bruce
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...

  7. #7
    Senior Member whtmare's Avatar
    Join Date
    Sep 2012
    Posts
    737
    Quote Originally Posted by marinedad View Post
    OK where do we sign up
    Seems like it's never quite enough for you ? What don't you understand about the attachment

    2008 mustang gt kenne bell blown 495 rwp 420rwtq.Dyno queen #s 509 rwp 432rwtq

  8. #8
    Moderator ToplessPony94's Avatar
    Join Date
    Apr 2012
    Location
    Hudson, NH
    Posts
    1,519
    Quote Originally Posted by whtmare View Post
    Seems like it's never quite enough for you ? What don't you understand about the attachment
    Ryan, I think the problem is the resolution of the image. I also had trouble reading it and probably couldn't have made out Randy's last name if I didn't already know it. It's not hard to understand if you can read it.

    Cheers!
    Bruce
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...

  9. #9
    Senior Member 07 stang gt's Avatar
    Join Date
    Apr 2012
    Location
    southern nh
    Posts
    571
    Right click your mouse, either hit "print" or it will say "save as", save at desktop, hit print, you should be good.. Just did mine

  10. #10
    Junior Member
    Join Date
    Oct 2013
    Location
    Derry NH
    Posts
    29

    Never enough

    Quote Originally Posted by whtmare View Post
    Seems like it's never quite enough for you ? What don't you understand about the attachment
    Sorry, didn't mean to offend.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts