+ Reply to Thread
Results 1 to 4 of 4

Thread: '70 Boss 302 runnin free

  1. #1
    Senior Member fredfordguy's Avatar
    Join Date
    Apr 2012
    Posts
    241

    '70 Boss 302 runnin free

    Got to hang out at the NHMS in Loudon last week and this beauty had me panting for more. It's a real B2, updated with a rack and pinion steering, hydroboost wilwood brakes and a 5 speed. It was very cool to watch this old 'stang making some noise....

  2. #2
    Moderator ToplessPony94's Avatar
    Join Date
    Apr 2012
    Location
    Hudson, NH
    Posts
    1,881
    Looks great! Almost as good as yours will turn out, I would expect!
    Bruce
    TFS TW heads, rockers, 75mm intake, cam, 75mm TB, CAI, MAF, DeatschWerks 35# injectors, Aeromotive rails/regulator, 255 pump, BeCool rad, alum water pump, MSD 6A/coil, alum flywheel, PP, driveshaft, McLeod clutch, Torsen T2R, 3.73, 31spline axles, 17" 95 Cobra R, NT-05 255/275, MM CC plates, coil-over (Bilstein), rlca, K-brace, A-arms, SF conns, Cobra brakes, =len shorties, 2.5" SS Hpipe, Borla CB...

  3. #3
    Member PonikNH's Avatar
    Join Date
    May 2012
    Location
    Milford NH
    Posts
    50
    Quote Originally Posted by fredfordguy View Post
    Got to hang out at the NHMS in Loudon last week and this beauty had me panting for more. It's a real B2, updated with a rack and pinion steering, hydroboost wilwood brakes and a 5 speed. It was very cool to watch this old 'stang making some noise....
    Nice to hear that the "old" iron is being run and updated.
    2012 Mustang Base V6 Coupe, 6 spd Automatic, 3.31 Rear Axle, Kona Blue

  4. #4
    Senior Member Jibber's Avatar
    Join Date
    Apr 2012
    Location
    New Hampshire
    Posts
    1,320
    That car looks great!!!
    SVT COBRA


+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts