Winter time car wash- in your garage !!

[07 stang gt]

Thought I would post up some pics I took today of how you can wash your vehicle in your garage, no hose, no scratches on your paint, in your warm garage. This can be accomplished on a vehicle that has some dirt and salt, not if it's heavily soiled.As you guys know, I only use Adams Premium Products on my vehicles and my customers vehicles as well, and they have a product called Rinseless Wash that I used on my 2002 F150 today. It is a concentrated formula made to mix with water in small amounts (16oz bottle to use before detail spray at car shows etc.) or can be mixed in a 5 gallon bucket to wash your vehicle when you have limited water supply(as in the winter months) or live in a condo,appt. etc. that does not allow washing of vehicles.I start with 4 oz of rinseless wash, mixed in a 5 gal bucket of warm tap water from the kitchen sink. I also fill a second bucket with warm clean water to use as your "rinseing" bucket. I presoaked my F150 with a solution of Rinseless Wash and water in a spray bottle, and heavily sprayed one panel at a time. This actually "pulls" the dirt off of your paint so you are not inducing any scratches, then with a presoaked microfiber towel that is soaking in the 5 gal bucket of Rinseless Wash, you wash each panel of the vehicle, removing all dirt etc, leaving behind a scratch free paint surface that shines like crazy.Some of you that have bought from me, Waterless Wash for your Mustangs,Rinsless Wash is a concentrated version of it, but needs to be mixed before use, and also has small amounts of wax in it to give it a little more of a shine than Waterless Wash. I find that Rinseless Wash has a little better lubricity to it, slicker is better when you aint got a hose !! Took less than an hour in total to wash, dry, wipe down rims and apply tire dressing and give it a final wipedown with detail spray. Here are some before/during and after pics. I carry all of the Adams products I used on my truck as well as all their waxes, glazes, sealants, microfiber towels, etc. with NO shipping charges and no waiting !! Here are some pics: rinseless wash 1-17-15 003.jpgrinseless wash 1-17-15 005.jpgrinseless wash 1-17-15 006.jpgrinseless wash 1-17-15 007.jpgrinseless wash 1-17-15 015.jpgrinseless wash 1-17-15 016.jpgrinseless wash 1-17-15 009.jpgrinseless wash 1-17-15 013.jpgrinseless wash 1-17-15 022.jpgrinseless wash 1-17-15 021.jpgrinseless wash 1-17-15 020.jpgrinseless wash 1-17-15 028.jpgrinseless wash 1-17-15 029.jpgrinseless wash 1-17-15 027.jpg

[Dennis O'Shea]

Question left a couple of bottles of adams products in my garage. And they froze solid are they no good now.Or will they come back after they thaw out?

[07 stang gt]

Depends on what product froze. What froze? Products like Detail spray should be ok, but if you have some liquid wax like Buttery Wax, it will seperate and form a clear liquid at the top (oils), you can try mixing it up in the bottle and see if the liquid seperates again, if it does, its time to replace it.Bring it in the house and let it come up to room temperature. Let me know what froze and I can help you better.

[Dennis O'Shea]

[QUOTE=07 stang gt;11602]Depends on what product froze. What froze? Products like Detail spray should be ok, but if you have some liquid wax like Buttery Wax, it will seperate and form a clear liquid at the top (oils), you can try mixing it up in the bottle and see if the liquid seperates again, if it does, its time to replace it.Bring it in the house and let it come up to room temperature. Let me know what froze and I can help you better.[/QUOTEJimmy talked to tech support at Adams .They were very helpful Said just bring it in and thaw it out.Any separation he said just shake it vigorously.And it should be fine

[TorchredSVT]

Do you have a drain in your garage? This would be a good idea....but im just not crazy about dumping all that water on the floor with no where for it to go

[07 stang gt]

Do you have a drain in your garage? This would be a good idea....but im just not crazy about dumping all that water on the floor with no where for it to go

No drain in my garage. I would say that a couple of gallons end up on the floor, easily pushed out the door with the floor squegge I have or the shop vac, no issue at all.There can only be so much water that ends up on the floor considering you are not using a hose to remove the water from the vehicle. I use an Adams microfiber waterless wash towel for removing the rinseless wash leaving no liquid on the paint, followed up with Adams detail spray, using that towel and a very plush Adams microfiber polishing towel for a quick buff.I attached some pics so you can see the before/during/after of the buckets with rinseless wash in the blue bucket and clean water in the green bucket,as well as a couple of pics of the waterless towel. It has a waffle weave to it, allowing liquid to be pulled into the towel, leaving no residue and no scratching of the paint like chamois,cheap microfiber towels, etc. do.As you can see, there is no dirt on the waterless towell after drying the entire truck meaning all the dirt went into the bucket not on the towel, ie no scratches !! The idea is to let the microfiber wash mit soak in the rinseless wash bucket and upon removing it, letting a majority of the rinseless wash drain from the mit back into the rinseless wash bucket so there is not much waste. When you are done washing the panel, you dip the wash mit into the clean bucket, removing the dirt etc. you have on the wash mit. There is an enormous amount of lubricity with rinseless wash, actually pulling dirt away from the paint so no scratches are induced to the paint. Very economical and no scratches and a beautiful shine left behind !! Believe me, I would rather be washing outside, but...Although I have no issue doing that when it gets above 40 deg.!! rinseless wash 1-17-15 012.jpgrinseless wash 1-17-15 018.jpgrinseless wash 1-17-15 006.jpgrinseless wash 1-17-15 014.jpgrinseless wash 1-17-15 030.jpg

[ToplessPony94]

Hey Jimmy! I was working in the garage Saturday afternoon and I wound a new use for In&Out spray!

I was cleaning up some corrosion on a light socket on my wife's car and replacing the bulbs with LEDs while I was in there. The official procedure for doing this involves taking off the entire bumper cover and grille among other things (thanks, Subaru!) and removing the headlight housings. Probably a whole afternoon's work doing it by myself.

Well, screw that! In&Out spray to the rescue! All I did was pull a total of 12 of those push-in fasteners:



In the picture below the red box shows the socket I was trying to get to on both sides. All I really needed was a screwdriver, very long nose pliers and In&Out spray! LOL!

[07 stang gt]

Hey Jimmy! I was working in the garage Saturday afternoon and I wound a new use for In&Out spray!

I was cleaning up some corrosion on a light socket on my wife's car and replacing the bulbs with LEDs while I was in there. The official procedure for doing this involves taking off the entire bumper cover and grille among other things (thanks, Subaru!) and removing the headlight housings. Probably a whole afternoon's work doing it by myself.

Well, screw that! In&Out spray to the rescue! All I did was pull a total of 12 of those push-in fasteners:



In the picture below the red box shows the socket I was trying to get to on both sides. All I really needed was a screwdriver, very long nose pliers and In&Out spray! LOL!

See I told you that was some incredible stuff !!!

[whtmare]

Most garages are sloped and you don't even notice. A good garage floor will not pool water. Ie ice and salt melting from your car....

[Jibber]

Can I use this stuff on the under carriage?